Skip to main content

1.75mm PLA 3D Printer Filament Colored

Sale!
26,00 € – 254,00 €
Neat spool minimizes ter filament tangle, ensure a smooth printing experience.
Neat Spool
No Bubble
No Plugging
Eco-friendly

1.75mm PLA 3D Printer Filament Colored

26,00 € – 254,00 €
Neat spool minimizes ter filament tangle, ensure a smooth printing experience.

Neat Spool

No Bubble

No Plugging

Eco-friendly

PARAMETER

PARAMETER

  PLA NOZZLE TEMP 190-230°C
Diameter 175 ± 0.02mm Notbad Temp No heated / 50-80°C
Total Length 340m around Tensile strength ≥55Mpa
Net Weight 1kg/Spool Density 1.25g ± 0.05g/cm³
Hardness HRC105-110 Bubble No Bubble

PARAMETER

  Pla Nozzle temp 190-230°C
Diameter 175 ± 0.02mm Notbad Temp No heated / 50-80°C
Total Length 340m around Tensile strength ≥55Mpa
Net Weight 1kg/Spool Density 1.25g ± 0.05g/cm³
Hardness HRC105-110 Bubble No Bubble
Applicable
printer.

    PRECAUTIONS

    • 1. Install the spool on the spool holder of a 3D printer, and preheat the nozzle of the 3D printer.
      2. Cut the filament tip diagonally, and pass it through the extruder and feeding tube.
      3. Manually push the filament through the feeding tube to the nozzle, until the filament melt through the nozzle.
    • When installing and changing filament, we highly suggest to preheat the nozzle firstly to reduce the nozzle block risk.
    Precautions.
    • 1. Install the spool on the spool holder of a 3D printer, and preheat the nozzle of the 3D printer.
      2. Cut the filament tip diagonally, and pass it through the extruder and feeding tube.
      3. Manually push the filament through the feeding tube to the nozzle, until the filament melt through the nozzle.
    • When installing and changing filament, we highly suggest to preheat the nozzle firstly to reduce the nozzle block risk.

    3D

    You may also like.
      You may also
      like.