Skip to main content

Anycubic DLP Craftsman Resin 1KG

45,00 €
Neat spool minimizes ter filament tangle, ensure a smooth printing experience.
High Accuracy
DLP Exclusive
Long Shelf Life

Anycubic DLP Craftsman Resin 1KG

45,00 €
Neat spool minimizes ter filament tangle, ensure a smooth printing experience.

High Accuracy

DLP Exclusive

Long Shelf Life

Parameter

Parameter

Parameter.
01

High Toughness
Not Easy to Break

Balancing softness with strength, Anycubic Flexible Tough Resin can withstand bending, flexing, and compression.
02

High Rigidity and
High Impact Strength

Parts printed with Anycubic Flexible Tough Resin are crash-proof and shows high impact strength.
03

High precision
Low shrinkage

It can provide high accuracy, smooth surface, clear print details and low shrinkage rate advantages for model printing.
04

Wide Compatibility

Applicable for most LCD 3D printers and optimized for 3D printing wavelengths between 365nm – 405nm, better effect with ANYCUBIC LCD 3D printers.
05

Industry Applications

Applicable for all kinds of models, shells and parts with rigid requirements, such as industrial spare parts, building models, DIY, maker design, daily design and other high-strength model production.
06

Optional Colors

Multiple colors avaible. Long lasting shine.
Wavelength 365-405nm Elongation at break 8%-12%
Density 1.15-1.20g/cm³ Molding shrinkage 3.72-4.24%
Viscosity 150-250 cP or mPa•s Flexural strength 50-70 MPa
Surface hardness 82 HD Flexural modulus 1,200-1,600 MPa
Tensile strength 35-50 MPa 1st-layer exposure 35 s
Normal exposure 2-3 s Shelf life 1.5 years

Precautions

    • (1) Before use:
      Shake the resin well before use; Clean the resin tank and platform, keep the bottom of the resin tank highly transparent.
    • (2) When using:
      Unscrew the cap and add it to the resin tank according to requirements; Select the correct print Settings to print.
    • (3) After use:
      After printing, use supporting tools for post-processing, including spatula; diagonal pliers, tweezers, containers, and gloves, Ethanol (≥95%); lactate or isopropyl alcool cleaning liquid.
    • (4) Post-processing steps:
      A. Remove the finished print from the platform with a spatula;
      B. Cleaning and curing. Using ANYCUBIC wash&cure machine better effec;
      C. Proper processing, such as remove supports, polishing, coloring, etc.
    • Keep sealed and away from light at room temperature. Avoid heat or sunlight.
    • Recommended temperature: 18-35°C. The printing effect may be affected if the temperature is too low. The resin can be preheated properly (not more than 60°C) before use.
    • In case of settlement of resin pigment, please stirring or shaking well before use.
    • In order to ensure the desired properties of cured materials, the intensity and time of light source during post-curing should be controlled. Therefore, it is suggested that: (1) The intensity of mercury lamp or LED light source is 5-10MW /m2, and the duration shall not exceed 1 hour (self-regulation); (2) The duration of sun exposure (summer) should be controlled at about 1 hour; (3) Close or long-term exposure under strong light sources such as high-power high-pressure mercury lamp is prohibited; (4) It is recommended to print in a dark room, or cover when printing.
    • Material performance may vary and depend on individual machine processing and post-curing. Please refer to the PRODUCT MSDS for safety information. Please feel free to contact us if there are any problems.
Precautions.
    • (1) Before use:
      Shake the resin well before use; Clean the resin tank and platform, keep the bottom of the resin tank highly transparent.
    • (2) When using:
      Unscrew the cap and add it to the resin tank according to requirements; Select the correct print Settings to print.
    • (3) After use:
      After printing, use supporting tools for post-processing, including spatula; diagonal pliers, tweezers, containers, and gloves, Ethanol (≥95%); lactate or isopropyl alcool cleaning liquid.
    • (4) Post-processing steps:
      A. Remove the finished print from the platform with a spatula;
      B. Cleaning and curing. Using ANYCUBIC wash&cure machine better effec;
      C. Proper processing, such as remove supports, polishing, coloring, etc.
    • The ideal condition for storing uncured resin is a cool, dark place at room temperature and protect from light to avoid high temperature or sunlight.
    • Suggested operating temperature is 18-35°C, and a low temperature may affect the printing effect, thus, the resin can be properly preheated before use (not more than 60°C).
    • If the resin pigment settles, it can be used after stirring or shaking.
    • To ensure the ideal performance of the curable material, it is necessary to control the intensity and time of the light source after curing, so it is recommended that: (1) The intensity of mercury lamp or LED light source is 5-10mW/m2, and the duration is no more than 1 hour (self-regulation); (2) The exposure time in the sun (summer) is around 1 hour; (3) Proximity or long-term exposure under strong light sources such as high-power high-pressure mercury lamps is prohibited. (4) It is recommended to print in a dark room or be covered with a lid while printing as resin is a photosensitive material.
    • PS: Material properties will vary depending on the molding equipment, post-cure method and testing equipment. For safety information, please refer to the MSDS of this product. If you encounter any problems during use, please feel free to contact us.

3D

You may also like.
    You may also
    like.
      You may also
      like.