Skip to main content

Anycubic Water-Wash Resin+ 1KG

36,00 €
ANYCUBIC water wash resin for 3D printer LCD high precision low odor low viscosity 3D printing photopolymer Standard.
Super Easy to clean
Low Odor and Safe
Wide Compatibility

Anycubic Water-Wash Resin+ 1KG

36,00 €
ANYCUBIC water wash resin for 3D printer LCD high precision low odor low viscosity 3D printing photopolymer Standard.

Super Easy to clean

Low Odor and Safe

Wide Compatibility

Parameter

Parameter

Parameter.
01

Multiple Choices & No Limitation

ANYCUBIC Water Washable Resin supports 3 ways of washing: Anycubic Wash & Cure machine, Running Water Washing and Ultrasonic Washing. There’s one way that suits you.
02

Low Shrinkage & Fast Speed

Print with fast curing speed and low shrinkage rate provide the excellent printing experience and effects. And the molding shrinkage as low as 3.7%.
03

Higher Precision

Based on ANYCUBIC photosensitive resin, specific proportions of nano – scale microcrystalline ceramic powders are added to make the resin more sensitive to light and get high accuracy prints.
04

Low Viscosity & Fast Printing

ANYCUBIC 3D Water Wash Resin with low viscosity means it has great fluidity during the printing process and helps to improve printing speed.
05

High-quality Prints without Cracks

Anycubic Product Lab shows that the models printed with our resin can be stored for 3 years in natural environment without cracks after curing.(Different models and environments may cause differences in experimental results)
06

Long Shelf Life

ANYCUBIC upgraded water washable resin has a longer the shelf life to 1 and a half years, to help the resin to store longer and safe use.
Wavelength 365-405nm Elongation at break 8%-15%
Density 1.15-1.2 g/cm³ Tensile modules of elasticity 1600-1800MPa
Viscosity 150-250mPa•s(25°c) Flexural strength 50-60 MPa
Hardness 80Shore D Flexural modulus 1500-1600MPa
Tensile strength 35-45 MPa 1zod Impact Strength 50-60 J/M

Precautions

    • Before use: Shake the liquid resin before use; Clean the resin tank and the molding platform to keep the bottom of the resin tank in light transmission.
    • When using: Unscrew the cap and add it to the resin tank according to the equipment requirements; Select the correct print parameters and settings for printing. 
    • After use: After printing, please use the matching tools for post-processing, including blade, diagonal pliers, tweezers, containers, gloves; ethanol (>95%), lactate or isopropyl alcool cleaning solution; 
    • Post-processing steps:
      A. Remove the printed model from the molding platform with a blade;
      B. Submerge the model in the cleaning solution, rinsed or ultrasonically washed, then taken out and drained; ANYCUBIC Wash and Cure machines are suggested to ensure better effect.
      C. Proper processing, such as removing support, polishing, coloring, etc.
    • The ideal condition for storing uncured resin is a cool, dark place at room temperature and protect from light to avoid high temperature or sunlight.
    • Suggested operating temperature is 18-35°C, and a low temperature may affect the printing effect, thus, the resin can be properly preheated before use (not more than 60°C).
    • If the resin pigment settles, it can be used after stirring or shaking.
    • In order to ensure the performance of the resin, please take out the model in time after cleaning to avoid the model soaking in water for a long time.
    • To ensure the mechanical properties of the model, please perform post- curing in time after cleaning and drying.
    • To ensure the ideal performance of the curable material, it is necessary to control the intensity and time of the light source after curing. Therefore, the following steps are recommended:
      (1) The intensity of mercury lamp or LED light source is 5-10mW/m?, and the duration is no more than 1 hour (self-regulation);
      (2) The exposure time in the sun (summer) is around 1 hour;
      (3) Proximity or long-term exposure under strong light sources such as high-power high-pressure mercury lamps is prohibited.
      (4) It is recommended to print in a dark room or be covered with a lid while printing as resin is a photosensitive material.
    • PS: Material properties will vary depending on the molding equipment, post-curing method and testing equipment. For safety information, please refer to the MSDS of this product. If you encounter any problems whileusing, please feel free to contact us.
Precautions.
    • Before use: Shake the liquid resin before use; Clean the resin tank and the molding platform to keep the bottom of the resin tank in light transmission.
    • When using: Unscrew the cap and add it to the resin tank according to the equipment requirements; Select the correct print parameters and settings for printing. 
    • After use: After printing, please use the matching tools for post-processing, including blade, diagonal pliers, tweezers, containers, gloves; ethanol (>95%), lactate or isopropyl alcool cleaning solution; 
    • Post-processing steps:
      A. Remove the printed model from the molding platform with a blade;
      B. Submerge the model in the cleaning solution, rinsed or ultrasonically washed, then taken out and drained; ANYCUBIC Wash and Cure machines are suggested to ensure better effect.
      C. Proper processing, such as removing support, polishing, coloring, etc.
    • The ideal condition for storing uncured resin is a cool, dark place at room temperature and protect from light to avoid high temperature or sunlight.
    • Suggested operating temperature is 18-35°C, and a low temperature may affect the printing effect, thus, the resin can be properly preheated before use (not more than 60°C).
    • If the resin pigment settles, it can be used after stirring or shaking.
    • In order to ensure the performance of the resin, please take out the model in time after cleaning to avoid the model soaking in water for a long time.
    • To ensure the mechanical properties of the model, please perform post- curing in time after cleaning and drying.
    • To ensure the ideal performance of the curable material, it is necessary to control the intensity and time of the light source after curing. Therefore, the following steps are recommended:
      (1) The intensity of mercury lamp or LED light source is 5-10mW/m?, and the duration is no more than 1 hour (self-regulation);
      (2) The exposure time in the sun (summer) is around 1 hour;
      (3) Proximity or long-term exposure under strong light sources such as high-power high-pressure mercury lamps is prohibited.
      (4) It is recommended to print in a dark room or be covered with a lid while printing as resin is a photosensitive material.
    • PS: Material properties will vary depending on the molding equipment, post-curing method and testing equipment. For safety information, please refer to the MSDS of this product. If you encounter any problems whileusing, please feel free to contact us.

3D

You may also like.
    You may also
    like.