Skip to main content

Anycubic Plant-based UV Resin 1KG

35,00 €
  • Biodegradable and made from soybean oil, truly eco-friendly.
  • No VOCs, no BPA, no harmful chemicals. Complied with EN 71-3:2013 safety standard.
  • Optimized curing time for Anycubic Photon, offering better printing quality.
  • Sensitive to 355nm~405nm UV light. Compatible with most LCD/DLP 3D printers.
Low Odor
Biodegradable
Eco-friendly
Low Shrinkage

Anycubic Plant-based UV Resin 1KG

35,00 €
  • Biodegradable and made from soybean oil, truly eco-friendly.
  • No VOCs, no BPA, no harmful chemicals. Complied with EN 71-3:2013 safety standard.
  • Optimized curing time for Anycubic Photon, offering better printing quality.
  • Sensitive to 355nm~405nm UV light. Compatible with most LCD/DLP 3D printers.

Low Odor

Biodegradable

Eco-friendly

Low Shrinkage

Parameter

Parameter

Parameter.
01

Low Odor

Plant based Resins made from soybean oil no VOCs.
02

Use more safety

Through RoHS and REACH testing, complied with EN 71-3:2013 safety standard.
03

Low shrinkage

Optimized low shrinkage for Anycubic Photon, offering better printing quality.
04

Wide Compatibility

Sensitive to 355nm~410nm UV light. Compatible with most LCD/DLP 3D printers.
05

Application industry

Model | Dental | Jewelry | Toy | Building | Industrial
06

Resin Parameters

Sensitive to 355nm~410nm UV light. Compatible with most LCD/DLP 3D printers.
Hardness 89D Bending strength 40-50MPa
Viscosity 150-350MPa-s (25°C) Extension Strength 35-45MPa
Shrinkage 1.88-2.45% Vitrification Temp 60±5°0
Shelf Time 1 Year Thermal deformation 55±50
Solid Density 1.05-1.25g/cm3 Elongation at Break 8%-12%
Wave Length 3550m-410nm Thermal Expansion95*5-6

Precautions

    • Usage condition:
      Shake up the bottle before use and avoid direct sunlight and dust. Wear a mask and gloves to avoid direct skin contact and maintain indoor ventilation. Recommended usage temperature: 25-30°C. Once the model is complete, please wash it with ethanol alcohol for at least 30 seconds.
    • Attention!
      When printing large model, please increase the build plate contact of the model or lower the infill density to avoid wrapping. Wash with plenty of water immediately if got accidently skin contact. If feel discomfort after you got skin contact, please see a doctor ASAP. Do not drink it and keep it sealed and out of the reach of children.
    • Storage
      Store in a dry and dust-free place under 25-35°C Keep it sealed and keep it away from sunlight.
Precautions.
    • Usage condition:
      Shake up the bottle before use and avoid direct sunlight and dust. Wear a mask and gloves to avoid direct skin contact and maintain indoor ventilation. Recommended usage temperature: 25-30°C. Once the model is complete, please wash it with ethanol alcohol for at least 30 seconds.
    • Attention!
      When printing large model, please increase the build plate contact of the model or lower the infill density to avoid wrapping. Wash with plenty of water immediately if got accidently skin contact. If feel discomfort after you got skin contact, please see a doctor ASAP. Do not drink it and keep it sealed and out of the reach of children.
    • Storage
      Store in a dry and dust-free place under 25-35°C Keep it sealed and keep it away from sunlight.

3D

You may also like.
    You may also
    like.