Skip to main content

Anycubic Plant-based UV Resin + 1KG

69,99 €
An upgrade to the resilience of the plant-based resin brings both good toughness and strength to the models, making them easier to shape and shockproof.
Light Odor
Eco-Friendly
Degraded Performance
Accurate and Stable

Anycubic Plant-based UV Resin + 1KG

69,99 €
An upgrade to the resilience of the plant-based resin brings both good toughness and strength to the models, making them easier to shape and shockproof.

Degraded Performance

Eco-Friendly

Light Odor

Accurate and Stable

Parameter

Parameter

Parameter.
01

Balance Between & Toughness and Resilience

An upgrade to the resilience of the plant-based resin brings both good toughness and strength to the models, making them easier to shape and shockproof.
02

Balanced Performance

Plant-based UV Resin + Mechanical Property Comparison
03

Recommendation Index

Improved toughness, more resistant to bending.
04

Stable High Performance and Delicate

A low shrinkage rate makes less deformation to the models when building. The smooth and fine details of the finished miniatures highlight the premium quality.
05

Eco-friendly & Light odor

Soy extract formula, BPA-free, benzene toxin-free, and irritating VOCs volatile-free. Low odor and safe to use.
06

Widely Compatible

Suited to most of the LCD 3D printers in the market. Better results in use with Anycubic LCD 3D printers.
UV wavelength 365-405nm Elongation at break 18%-20%
Density 1.05-1.25g/cm³ Molding shrinkage 3.72-424%
Viscosity 300-500cP/mPa•s Flexural strength 40-60 MPa
Hardness 84 D Flexural modulus 1,200-1,400MPa
Tensile strength 35-55 MPa Heat deflection temp 80s
Bottom exposure time 20-40s Resin washAlcohol
Normalexposure time 1.5-3 Shelf life1.5 Year

Precautions

    • Before use: Shake the resin well before use; Clean the resin tank and platform, keep the bottom of the resin tank highly transparent. 
    • When using: Unscrew the cap and add it to the resin tank according to requirements; Select the correct print Settings to print. 
    • After use: After printing, use supporting tools for post-processing, including spatula; diagonal pliers, tweezers, containers, and gloves, Ethanol (≥95%); lactate or isopropyl alcool cleaning liquid.
    • Post-processing steps:
      A. Remove the finished print from the platform with a spatula;
      B. Cleaning and curing.
    • Using ANYCUBIC wash&cure machine better effec;
    • Keep sealed and away from light at room temperature. Avoid heat or sunlight.
    • Recommended temperature: 18-35°C. The printing effect may be affected if the temperature is too low. The resin can be preheated properly (not more than 60°C) before use.
    • In case of settlement of resin pigment, please stirring or shaking well before use.
    • In order to ensure the desired properties of cured materials, the intensity and time of light source during post-curing should be controlled. Therefore, it is suggested that:
      (1) The intensity of mercury lamp or LED light source is 5-10MW /m2, and the duration shall not exceed 1 hour (self-regulation);
      (2) The duration of sun exposure (summer) should be controlled at about 1 hour:
      (3) Close or long-term exposure under strong light sources such as high-power high-pressure mercury lamp is prohibited;
      (4) It is recommended to print in a dark room, or cover when printing.
    • Material performance may vary and depend on individual machine processing and post-curing. Please refer to the PRODUCT MSDS for safety information. Please feel free to contact us if there are any problems.
Precautions.
    • Before use: Shake the resin well before use; Clean the resin tank and platform, keep the bottom of the resin tank highly transparent. 
    • When using: Unscrew the cap and add it to the resin tank according to requirements; Select the correct print Settings to print. 
    • After use: After printing, use supporting tools for post-processing, including spatula; diagonal pliers, tweezers, containers, and gloves, Ethanol (≥95%); lactate or isopropyl alcool cleaning liquid.
    • Post-processing steps:
      A. Remove the finished print from the platform with a spatula;
      B. Cleaning and curing.
    • Using ANYCUBIC wash&cure machine better effec;
    • Keep sealed and away from light at room temperature. Avoid heat or sunlight.
    • Recommended temperature: 18-35°C. The printing effect may be affected if the temperature is too low. The resin can be preheated properly (not more than 60°C) before use.
    • In case of settlement of resin pigment, please stirring or shaking well before use.
    • In order to ensure the desired properties of cured materials, the intensity and time of light source during post-curing should be controlled. Therefore, it is suggested that:
      (1) The intensity of mercury lamp or LED light source is 5-10MW /m2, and the duration shall not exceed 1 hour (self-regulation);
      (2) The duration of sun exposure (summer) should be controlled at about 1 hour:
      (3) Close or long-term exposure under strong light sources such as high-power high-pressure mercury lamp is prohibited;
      (4) It is recommended to print in a dark room, or cover when printing.
    • Material performance may vary and depend on individual machine processing and post-curing. Please refer to the PRODUCT MSDS for safety information. Please feel free to contact us if there are any problems.

3D

You may also like.
    You may also
    like.